Mercedes-Benz

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm Per saperne di più

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

Three Odometer Gear Set for VDO Instrument Clusters only. (electronic signal pick up) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 18 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

Three Odometer Gear Set for VDO Instrument Clusters only. (electronic signal pick up) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

15 tooth odometer gear. (E15) The diameter of this gear is 6.90mm or .271" This gear rides on a small pod gear There are 2 gears that operate the odometer. 1. Odometer gear -E15 2. Odometer Pod -small 12, 15 or 16 teeth We always recommend to replace both gears at the same time. Per saperne di più

There are different tooth count options for the odometer pod. 12, 15 and 16 tooth small pod gear - Diameter 15.4mm Please count the teeth before you order the new gear. There are 2 gears that operate the odometer. 1. Odometer gear - E15 2. Odometer Pod - see drop down menu We always recommend to replace both gears at the same time. Per saperne di più

This gear only repairs the articulation of the wiper arm in and out. OE wiper transmission #140-820-04-07 Per saperne di più