0 - Item

Non hai articoli nel carrello.

Subtotale: 0,00 €

Volvo 740-760-940-960 '83-'92

Griglia  Lista 

per pagina
  1. Volvo 700 26 Tooth Odometer Gear

    Volvo 700 26 Tooth Odometer Gear

    22,00 €

    Only for VDO speedo. If you have a Yazaki speedo (metal spacing on gauge face between trip meter numbers) then the gears are not your concern as it will be an electronic failure. This gear rides on a large pod gear. The two gears together operate the odometer. If you only want to repair the odometer once then replace both at the same time. The diameter of this gear is 11.00 mm or .433" Per saperne di più
  2. Volvo 700 15 Tooth Large Odometer Pod

    Volvo 700 15 Tooth Large Odometer Pod

    22,00 €

    The original pod was made in two parts, the disc and then the urethane gear. We manufacture the replacement pod as one piece. This ensures a stronger part with no failure possible. You will need to count the teeth of your old pod before ordering. Recommended to also order gear listed above.700 Per saperne di più
  3. Volvo 700 VDO Three Odometer Gear Set

    Volvo 700 VDO Three Odometer Gear Set

    57,00 €

    Three Odometer Gear Set for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più
  4. Volvo 700 VDO Individual Odometer Gears

    Volvo 700 Series VDO Individual Odometer Gears

    22,00 €

    Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Per saperne di più

Griglia  Lista 

per pagina